S & M Kustomz Forum

Decided it was time to get this vibration in the Corvette fixed. Didn't get out today till after noon but got the drivers side upper and lower control arms off. Replaced all the bushings and the ball joints. Cleaned everything up really nice. Still found nothing there to cause the vibration. Get it back together tomorrow and start on the passenger side. And just keep going till I find something this time.

Only got the drivers side done this weekend. Had a couple people come by needing some work done so I will get to the passenger side next weekend. And found nothing to stop the vibration on the drivers side. Although it is a little better. Maybe just a combination of all the bushings causing the problem