It's on with the engine swap. 305 out getting 350 ready on the engine run stand. Next up rebuilding the th350 before it goes back in.
Worn out 305
350 on the run stand and the th350 draining for tear down next weekend
Re: Icky Minnow Engine Swap
Posted: Mon Aug 19, 2019 12:35 pm
by Sjordan
Decided to pull the heads since this thing has a fairly large cam in it and install some screw in rocker studs. With press in studs and over .500" lift it didn't sound like a good idea. Flat tops, 882 heads with steel shim head gaskets to help bump the compression up a little.
Still waiting on some parts we had to order, but the engine should be fired up on the run stand this coming Saturday. The transmission should be assembled this weekend also. Lots to do, little time to get it done.
Re: Icky Minnow Engine Swap
Posted: Thu Aug 22, 2019 1:30 am
by Sjordan
Engine together and running on the engine run stand. This was right after setting the timing and carb adjustment so it would idle. Will find it up this weekend.
Re: Icky Minnow Engine Swap
Posted: Mon Aug 26, 2019 1:21 pm
by Sjordan
Got the transmission all back together. It's now a full manual TH350. Used an old school B & M Manualpack
Inside back together, had to replace the input shaft and intermediate sprag. Swapped put the center support plate for one from a 700R4 for the wider sprag there.
Modifying the valve body
Valvebody back on ready fished assembly
Kit used to convert to full manual
Ready to mate this back up to the engine with stall converter and get it back in the Icky.
Re: Icky Minnow Engine Swap
Posted: Thu Sep 05, 2019 10:21 am
by Sjordan
The engine and trans is in the car and will be running this weekend. I'll get some pictures up soon, been behind on that.
Re: Icky Minnow Engine Swap
Posted: Mon Sep 09, 2019 2:50 pm
by Sjordan
Finally have the car running and driving. Made a first drive video. We'll make some more videos as we go. Turned out pretty good for the first time I have edited a video. Got a cheap go-pro type camera we can mount to the car, so planning on having some fun with that. Still got plenty more to add here, just need to get the time to get it all posted.